>> เช็คสต๊อคสินค้า <<

บอร์ดควบคุมอุณหภูมิ ใช้สำหรับควบคุมช่วงอุณภูมิที่ต้องการ ตามที่กำหนด
ย่านการควบคุมอุณหภูมิอยู่ในช่วง -50 ถึง 110 องศาเซลเซียส

Specifications:

• Temperature control range: -50 ~ 110 °C
  
• Resolution: -9.9 to 99.9 is 0.1°C , 1 °C
  
• Measurement Accuracy: 0.1 °C
  
• Control accuracy: 0.1 °C
  
• Hysteresis accuracy: 0.1 °C
  
• Refresh rate: 0.5S
  
• Input Power: DC12V
  
• Measuring inputs: NTC (10K 0.5%)
  
• Waterproof sensor : 0.5M
  
• Output: 1 Channel relay output
  
• Capacity = 10A
  
• Environmental requirements: -10 ~ 60 °C
  
• Humidity : 20% -85%
  
• Size: 48 (L) * 40 (W) * 14 (D) mm
• Power consumption
  
• Static current:<=35MA
  
• Attract current:<=65MA

วีดีโอสาธิตการใช้งาน รีเลย์ควบคุมอุณหภูมิ

ไม่มีรับประกันสินค้า

รีเลย์ควบคุมอุณหภูมิ Analog Temperature Sensor LM35D Module Electronic Blocks For Arduino

>> เช็คสต๊อคสินค้า <<

Product Description:

• Size: 28mm long X wide 12mm high X 10mm
  
• The main chip: LM35 temperature sensor
  
• Working voltage: DC 4-30V

Characteristic:

1.  the linear coefficient variation: +10mv/ oC
   
2. the low power consumption  less than: 60uA
   
3. the temperature measurement range: 0—100 oC
   
4. the temperature measurement accuracy ± 0.5 oC
   
5. wide working voltage range: DC4~30V
   
6. the linear analog signal output 

ไม่มีรับประกันสินค้า

รีเลย์ควบคุมอุณหภูมิ 5V Thermal Sensor Module Relay Module Combo Module thermistor temperature sensor module

>> เช็คสต๊อคสินค้า <<

Product Description:

• Humidity testing, humidity sensors, environment humidity testing, relay output, direct power control related equipment
  

The module features:

• USES the high quality HR202 wet sensor
  
• the comparator output direct drive relay, 220 v ac or other equipment
  
• with potentiometer to adjust temperature detection threshold
  
• can hold row needles, sensor interface, add wet lead sensor

Electrical parameters:

• Power supply voltage: 5 VDC (default: 5 V current is larger than 150 ma)
• 10 A maximum load: 250 VAC or 30 VDC 10 A (all can be used is less than the power)

Module USES:

1. the moisture sensor is most sensitive to the environment humidity, generally used to detect the humidity of the surroundings.
2. modules, environment humidity more than set threshold, relay, absorption and often start through public end, and when the environment humidity is lower than the setting threshold, relay disconnect, public end with normally closed end connected.
3. the public side, normally open, normally closed three ports is equivalent to a double switch, relay coil electricity, public end and beginning conduction, often without electricity, public end with normally closed end conduction.
   
   

ไม่มีรับประกันสินค้า

รีเลย์ควบคุมอุณหภูมิ Thermistor relay control module Temperature sensor detection Ttemperature controller switch 12V

>> เช็คสต๊อคสินค้า <<

Features:

• ช่วงอุณหภูมิ : -9-99 °C
• ความแม่นยำ:: 1 °C
• Control accuracy: 1 °C
• Setting Range: -9-99 °C
• Refresh rate: 0.5S.
• Input Power: DC9V-15V.
• Output: relay output, capacity 220V 10A / 12V 10A.
• Environmental requirements: -10-60 degrees.
• Humidity: 20% -85%.
• Temperature sensor: NTC(3950-10k 1%).
• ขนาด : 7.8cm x 5.1cm x 3cm .

Lights, digital tube, key state description:

• Red start Indicator: START (red) indicator light, which means that the relay is closed, the device begins to work.
• Green stop light: Stop (green) light is on, which means that the relay is disconnected, the device stops working.
• Digital Tube: Middle red LED display for the current detection temperature, the left green digital display tube as set start temperature, the right side of the green digital display for the set stop temperature.
• Button: START UP and Down to set start temperature; Stop the button to set stop temperature.

Operating Instructions:

• 1, High temperature start.
• Set the starting temperature value> stop temperature value.
• When the detected temperature ≥ start temperature, the relay is closed, refrigeration equipment work.
• When the detected temperature ≤ stop temperature, the relay off, refrigeration equipment stops working.
• For example: Set the starting temperature is 30 degrees, stop temperature is 25 degrees.
• When the detected temperature ≥ 30 degrees, the relay is closed, the start Indicator (red) lights.
• When the detected temperature value ≤ 25 degrees, the relay off, stop Indicator (green) light.
• 2, cold start: start temperature set value.
• When the detected temperature ≤ start temperature relay is closed, the heating device operates.
• When the detected temperature ≥ stop temperature, the relay off, the heating device is stopped.
• For example: Set the starting temperature is 25 degrees, stop temperature is 30 degrees.
• When the detected temperature value ≤ 25 degrees, the relay is closed, the start Indicator (red) lights.
• When the detected temperature ≥ 30 degrees, the relay off, stop Indicator (green) light.
• 3, Set to start when the temperature value = stop temperature value, the relay off.

Diagram

รับประกันสินค้า 1 เดือน

Features:

• ช่วงอุณหภูมิ: -9 ~ 99°C
• ความแม่นยำ: 1 °C
• Control accuracy: 1°C
• Setting Range: -9 ~ 99°C
• Refresh rate: 0.5S.
• Input Power: DC24V
• Output: relay output, capacity 220V 10A / 12V 10A.
• Environmental requirements: -10 ~ 60 degrees.
• Humidity: 20% -85%.
• Temperature sensor: NTC(3950-10k 1%).
• ขนาด: 7.8cm x 5.1cm x 3cm .

Lights, digital tube, key state description:

• Red start Indicator: START (red) indicator light, which means that the relay is closed, the device begins to work.
• Green stop light: Stop (green) light is on, which means that the relay is disconnected, the device stops working.
• Digital Tube: Middle red LED display for the current detection temperature, the left green digital display tube as set start temperature, the right side of the green digital display for the set stop temperature.
• Button: START UP and Down to set start temperature; Stop th button to set stop temperature.

Operating Instructions:

• 1, High temperature start.
• Set the starting temperature value> stop temperature value.
• When the detected temperature ≥ start temperature, the relay is closed, refrigeration equipment work.
• When the detected temperature ≤ stop temperature, the relay off, refrigeration equipment stops working.
• For example: Set the starting temperature is 30 degrees, stop temperature is 25 degrees.
• When the detected temperature ≥ 30 degrees, the relay is closed, the start Indicator (red) lights.
• When the detected temperature value ≤ 25 degrees, the relay off, stop Indicator (green) light.
• 2, cold start: start temperature set value.
• When the detected temperature ≤ start temperature relay is closed, the heating device operates.
• When the detected temperature ≥ stop temperature, the relay off, the heating device is stopped.
• For example: Set the starting temperature is 25 degrees, stop temperature is 30 degrees.
• When the detected temperature value ≤ 25 degrees, the relay is closed, the start Indicator (red) lights.
• When the detected temperature ≥ 30 degrees, the relay off, stop Indicator (green) light.
• 3, Set to start when the temperature value = stop temperature value, the relay off.

Diagram

รับประกันสินค้า 1 เดือน

บอร์ดควบคุมอุณหภูมิ ใช้สำหรับควบคุมช่วงอุณภูมิที่ต้องการ ตามที่กำหนด
ย่านการควบคุมอุณหภูมิอยู่ในช่วง -20 ถึง 100 องศาเซลเซียส

Specifications:

• SCM control, intelligentize, easy operation, low power consumption
• Outage setting, automatic memory
• Control accuracy 0.1
• Size: Approx. 67 x 42 x 18mm / 2.64 x 1.65 x 0.71 inch
• Patch Cord Length: Approx. 1M / 39.37 inch, 2 pin port
   

Technical parameters:

• Temperature Control Range: -20-100
• Resolution Ratio: -9.9~99.9: 0.1, other temperature is 1
• Temperature Measurement Accuracy: 0.1
• Control Accuracy: 0.1
• Return Difference Accuracy: 0.1
• Refresh Rate: 0.5 S
• Input Power Supply: DC 5V, DC 12V, DC 24V
• Measuring Inputs: NTC10K 0.5%waterproof sensor
• Output: 1 channel relay output, capacity =20A 125VAC20A 14VDC
• Environmental Requirement: -10~60, humidity: 20%-85%
• Size: Approx. 48.5 x 40mm / 1.9 x 1.5 inch
• Overall Power Consumption: Quiescent current: ≤10MA, operating current ≤65MA
• Indicator Light Direction: Flash shows start-up delay of refrigeration or heating,keep lighting shows the relay has closed
• Nixie Tube: LL state shows open for sensor; please connect the sensor base on instruction,
  HH state shows exceed measurement range, temperature controller would peremptory turn off the relay,
  — state shows high temperature alarm

Wiring Diagram
TPC019 : DC 12V Temperature Display Module Sensor Relay Switch Control -20 to 100 degree Celsius

ไม่มีรับประกันสินค้า

บอร์ดควบคุมอุณหภูมิ ใช้สำหรับควบคุมช่วงอุณภูมิที่ต้องการ ตามที่กำหนด
ย่านการควบคุมอุณหภูมิอยู่ในช่วง -19 ถึง 99 องศาเซลเซียส

Product Details:

• Category: XH-1411
  
• Classification: AC 220V
  
• Working principle: digital temperature control
  
• Power: 10A
  
• Temperature range of temperature controller: -19~99 Celsius degrees

Product introduction:
Using MCU control system and highly accurate temperature detection probe, this product is clearly better than other products of the same category in terms of temperature control performance and accuracy. This product uses the design of three display windows, which can perform real-time display for start and stop value. Moreover, it has other functions such as intermittent work, time switch, etc. It can be widely used in greenhouse cultivation, aquaculture and animal husbandry, computer lab temperature control and other fields. It is also a great helper for household life!

Main parameters:

• Product name: Highly accurate digital temperature controller
  
• Specification and model: XH-1411
  
• Temperature measurement range: -55~+120 Celsius degrees
  
• Temperature measurement accuracy: ±0.3 Celsius degrees
  
• Resolution: 0.1 Celsius degrees
  
• Temperature control range: -19~99 Celsius degrees
  
• Control accuracy: 1 Celsius degree
  
• Temperature measurement probe: NTC10K/B3950 standard 1m water-proof probe
  
• Power supply voltage: AC 220V
  
• Display color: red, green, blue, yellow (alternative)
  
• Applicable environment: -25~55 Celsius degrees, humidity 20%~85% (no condensation)
  
• Output type: 10A relay output
  
• Appearance size: 90*60mm
  
• Open hole size: 70*50mm

Usage method:

1. Plug the plug of this product to a household socket. If the screen displays temperature, it means the power supply has been correctly connected.
   
2. Put the temperature control probe into the places that need temperature control, and set the start and stop temperature according to your needs.
   
3. Plug the plugs of heating and refrigeration devices to the socket of temperature controller, and then you can achieve temperature control.

Operation instructions:
After power-on, if the temperature is within the range, you should immediately start the output and make it stop when it reaches the set value.
Start temperature For example, if you want to control water boiling to stop at 60 Celsius degrees and start over at 45 Celsius degrees, then you should set the start value as 45 and stop value as 60.
Start temperature >stop temperature: refrigeration mode
For example, in summer, you want to control the greenhouse to start the scavenger fan when the temperature is higher than 35 Celsius degrees and stop at 32 Celsius degrees, then you should set the start value as 35 and stop value as 32.
SET: function button/power-on & power-off button
In the state of power-on, you can switch off by a long press for 3 seconds. After switched off, it will still remain power-off if there is no power supply.
In the state of power-off, you can switch on by pressing SET once. After switched on, it will still remain power-on if there is no power supply.
In the state of normal temperature control, you can switch between F-1~F-3 by pressing SET once.
F-1 intermittent work mode unit: minute left: start minute right: stop minute
F-2 time switch left: hour right: minute 99h59mins max
F-3 time switch left: hour right: minute 99h59mins max

Temperature correction: Enter the temperature correction function by removing the controller plug and pressing SET to supply power. The screen displays –00–. You can increase or decrease temperature on the basis of the original temperature, maximum range -9.9~+99. After correction:
Real-time temperature = the temperature before correction + the corrected value
Press (start+-) power-on to enter self-check function;
Press (stop+-) power-on to restore factory settings.

Restore factory settings:
If there is some setting mistake or setting disorder, you can press the two stop buttons to restore factory settings.
When the screen displays 88-888-88, and the buzz gives out a long sound, it means the restoration has finished.
Default start value is 25, stop 40, F-1 01-10, F2 00-30, F-3 00-30, correction=000

Failure recovery:

1. No reaction after power supply, no lightening of the screen
   Check whether the socket has electricity by using other electrical devices with the same plug. If there is electricity, check whether the temperature controller has been powered off, then you can press SET once for power-on.
   
2. The screen can display, but cannot realize temperature control function
   If the temperature is correctly set, yet both start and stop fail, the reason might be there is some mistake for start and stop setting value. Please exchange the set value and stop value.
   
3. Temperature change exceeds the control range
   This controller is position control, which means the red light is on for start, and green light for stop. If changes of the indication lights during control are right, yet there is overshoot temperature, then it means the temperature controller is in good condition. You can solve the problem by lowering your heating or refrigeration power.
   
4. There is some difference between measured and actual temperature
   The middle part of the controller displays actual temperature. If you feel the present temperature is 30 Celsius degrees yet the controller displays 29.6, you can enter temperature correction by pressing SET power-on to correct the temperature as 0.4. if the actual temperature is 31.2, but you think it is 30, then you can decrease the corrected value as -1.2 to get the temperature you want.

Diagram

รับประกันสินค้า 1 เดือน

Features:

• เครื่องควบคุมอุณหภูมิขนาดเล็ก
  
• หน้าจอ LCD ขนาดใหญ่ อ่านค่าได้ชีดเจน
  
• ช่วงการวัดอุณหภูมิกว้าง
  
• ควบคุมการระบายความร้อน
  
• สามารถสอบเทียบได้
  
• ฟังก์ชั่นป้อนกันดีเลย์
  
• สามารถใช้งานได้หลากหลายประเภท สำหรับการแช่แข็ง, ถังเก็บน้ำ, ตู้เย็น, เครื่องทำความเย็น, หม้อไอน้ำ, เรือกลไฟ, อุปกรณ์อุตส่าหกรรม และอื่นๆ
  
• ระบบควบคุมอุณหภูมิ
• All parameters can be set to default setting after short circuit.

Specifications:

• Temperature measuring range: -50 ~ 110
• Temperature control range: -50 ~ 110
• Temperature measurement accuracy: plus or minus 0.2 degrees
• Temperature control accuracy: plus or minus 0.1 degrees
• Input measurement: NTC10K probe L = 1 meter waterproof
• Input power: according to the classification of choice
• Output power: according to the classification of choice
• Appearance size: 60 * 45 * 31 mm
• Press up to show start temperature button
• Long press The UP button the temperature display Flashing, press the UP or DOWN button Set the beginning of the temperature value
• Press Down the display button to stop temperature
• Long press the Down button the temperature display Flashing, press the UP or Down button Set to stop the temperature value

รับประกันสินค้า 1 เดือน

บอร์ดควบคุมอุณหภูมิ ใช้สำหรับควบคุมช่วงอุณภูมิที่ต้องการ ตามที่กำหนด
ย่านการควบคุมอุณหภูมิอยู่ในช่วง -50 ถึง 110 องศาเซลเซียส

Features:

• Supply voltage: 12V
  
• Temperature range: -50-110 degree
  
• Control accuracy: 0.1 degree
  
• Load power: 12V   /  120W
  
• Measuring input: NTC10K waterproof probe L = 1Meter
  
• Output capacity: 10A
  
• Installation pitch: 73mm (aperture 4mm)
  
• Dimensions: 60 * 45 * 31mm

12v Wiring:
Tip: 12V DC power supply or you can use a transformer power supply 12V output
Note: The product is directly output, so when the output terminals are not connected load, do not energized, to prevent contact with two wires and ignition

What is a direct output:
This thermostat output and input voltage are synchronous, meaning that the thermostat in the operating state (lights), How much input voltage and How much is the output voltage directly.When the thermostat (lights out) in the work, the output end there will be no voltage output
 
Intelligent judgment modes of operation:
Start temperature Start temperature> stop temperature = cooling mode

Heating mode setting mode:
Setting Tips: Start temperature
 
Setting mode:
1. Long Press up button, start the temperature of the flash,Through up and down keys to set the start temperature
2.Long Press Down button, stop the temperature of the flash,Through up and down keys to set the stop temperature

Use case:
Control water heaters, heated to 65 degrees to stop, the temperature dropped to 50 degrees to start heating again, how to set?
Step 1: Determine the operating mode for the heating mode, starting temperature Step Two: long Press the up button, the temperature starts flashing up and down keys to set the starting temperature of 50 degrees
The third step: Press the button down, the temperature stops flashing, stop by the arrow keys to set the temperature to 65 degrees, setting is completed.

Cooling mode is set up:
Setting Tips: Start temperature> stop temperature (the program automatically determines the operating mode to cooling mode)
Setting mode:
1. Press the button on the key to start the temperature of the flash, up and down keys to set the start temperature
2. Long press the key button to stop temperature flash, stop up and down keys to set the temperature value

Use case:
Control farms, ventilate to 26 degrees stopped, the temperature rose to 28 degrees start cooling again, how to set?
Step 1: Determine the operating mode is a cooling mode, starting temperature> stop temperature
Step Two: Long Press the button raised, the temperature starts flashing up and down keys to set the starting temperature of 28 degrees
The third step: Press the button down, the temperature stops flashing, set the stop up and down keys to a temperature of 26 degrees set.

Tip: set the heating mode, if you do not accidentally set the temperature set value is inverted, the output light is off, the load does not work, if there is the case after setting above, you can check the temperature value is not reversed .

package include:

• 1pc -50-110 Degree Heat Cool Digital Thermostat

รับประกันสินค้า 15 วัน

>> เช็คสต๊อคสินค้า <<

คุณสมบัติของเครื่องวัดอุณหภูมิ:

• โมเดล: MH1210W
  
• ย่านการวัดอุณหภูมิ: -50 ถึง 110 องศา
  
• Control precision: 0.1 Celsius degree
• ค่าความแม่นยำในการวัด: ±0.3% องศา
  
• หน้าจอแสดงผล: LCD
• ควรติดตั้งตัวเครื่อง ในตำแหน่งที่อุณหภูมิไม่สูงเกิน 70 ^oC
  
• Working voltage: 100-250V±10%
• Rated current: 10A
• Power consumption: ≤3W
• Temperature sensor: NTC 25 ^oC =10K B3435
• ขนาด: 85*75*35mm
  

คลิปรีวิวสินค้า

Diagram : รูปใหญ่

รับประกันสินค้า 1 เดือน

บอร์ดควบคุมอุณหภูมิ ใช้สำหรับควบคุมช่วงอุณภูมิที่ต้องการ ตามที่กำหนด
ย่านการควบคุมอุณหภูมิอยู่ในช่วง -19 ถึง 99 องศาเซลเซียส

Product Details:

• Category: XH-1411
  
• Classification: DC 12V
  
• Working principle: digital temperature control
  
• Power: 10A
  
• Temperature range of temperature controller: -19~99 Celsius degrees

Product introduction:
Using MCU control system and highly accurate temperature detection probe, this product is clearly better than other products of the same category in terms of temperature control performance and accuracy. This product uses the design of three display windows, which can perform real-time display for start and stop value. Moreover, it has other functions such as intermittent work, time switch, etc. It can be widely used in greenhouse cultivation, aquaculture and animal husbandry, computer lab temperature control and other fields. It is also a great helper for household life!

Main parameters:

• Product name: Highly accurate digital temperature controller
  
• Specification and model: XH-1411
  
• Temperature measurement range: -55~+120 Celsius degrees
  
• Temperature measurement accuracy: ±0.3 Celsius degrees
  
• Resolution: 0.1 Celsius degrees
  
• Temperature control range: -19~99 Celsius degrees
  
• Control accuracy: 1 Celsius degree
  
• Temperature measurement probe: NTC10K/B3950 standard 1m water-proof probe
  
• Power supply voltage: DC 12V
  
• Display color: red, green, blue, yellow (alternative)
  
• Applicable environment: -25~55 Celsius degrees, humidity 20%~85% (no condensation)
  
• Output type: 10A relay output
  
• Appearance size: 90*60mm
  
• Open hole size: 70*50mm

Usage method:

1. Plug the plug of this product to a household socket. If the screen displays temperature, it means the power supply has been correctly connected.
   
2. Put the temperature control probe into the places that need temperature control, and set the start and stop temperature according to your needs.
   
3. Plug the plugs of heating and refrigeration devices to the socket of temperature controller, and then you can achieve temperature control.

Operation instructions:
After power-on, if the temperature is within the range, you should immediately start the output and make it stop when it reaches the set value.
Start temperature For example, if you want to control water boiling to stop at 60 Celsius degrees and start over at 45 Celsius degrees, then you should set the start value as 45 and stop value as 60.
Start temperature >stop temperature: refrigeration mode
For example, in summer, you want to control the greenhouse to start the scavenger fan when the temperature is higher than 35 Celsius degrees and stop at 32 Celsius degrees, then you should set the start value as 35 and stop value as 32.
SET: function button/power-on & power-off button
In the state of power-on, you can switch off by a long press for 3 seconds. After switched off, it will still remain power-off if there is no power supply.
In the state of power-off, you can switch on by pressing SET once. After switched on, it will still remain power-on if there is no power supply.
In the state of normal temperature control, you can switch between F-1~F-3 by pressing SET once.
F-1 intermittent work mode unit: minute left: start minute right: stop minute
F-2 time switch left: hour right: minute 99h59mins max
F-3 time switch left: hour right: minute 99h59mins max

Temperature correction: Enter the temperature correction function by removing the controller plug and pressing SET to supply power. The screen displays –00–. You can increase or decrease temperature on the basis of the original temperature, maximum range -9.9~+99. After correction:
Real-time temperature = the temperature before correction + the corrected value
Press (start+-) power-on to enter self-check function;
Press (stop+-) power-on to restore factory settings.

Restore factory settings:
If there is some setting mistake or setting disorder, you can press the two stop buttons to restore factory settings.
When the screen displays 88-888-88, and the buzz gives out a long sound, it means the restoration has finished.
Default start value is 25, stop 40, F-1 01-10, F2 00-30, F-3 00-30, correction=000

Failure recovery:

1. No reaction after power supply, no lightening of the screen
   Check whether the socket has electricity by using other electrical devices with the same plug. If there is electricity, check whether the temperature controller has been powered off, then you can press SET once for power-on.
   
2. The screen can display, but cannot realize temperature control function
   If the temperature is correctly set, yet both start and stop fail, the reason might be there is some mistake for start and stop setting value. Please exchange the set value and stop value.
   
3. Temperature change exceeds the control range
   This controller is position control, which means the red light is on for start, and green light for stop. If changes of the indication lights during control are right, yet there is overshoot temperature, then it means the temperature controller is in good condition. You can solve the problem by lowering your heating or refrigeration power.
   
4. There is some difference between measured and actual temperature
   The middle part of the controller displays actual temperature. If you feel the present temperature is 30 Celsius degrees yet the controller displays 29.6, you can enter temperature correction by pressing SET power-on to correct the temperature as 0.4. if the actual temperature is 31.2, but you think it is 30, then you can decrease the corrected value as -1.2 to get the temperature you want.

Diagram

รับประกันสินค้า 1 เดือน

Features:

• เครื่องควบคุมอุณหภูมิขนาดเล็ก
  
• หน้าจอ LCD ขนาดใหญ่ อ่านค่าได้ชัดเจน
  
• ช่วงการวัดอุณหภูมิกว้าง
  
• ควบคุมการระบายความร้อน
  
• สามารถสอบเทียบได้
  
• ฟังก์ชั่นป้อนกันดีเลย์
  
• สามารถใช้งานได้หลากหลายประเภท สำหรับการแช่แข็ง, ถังเก็บน้ำ, ตู้เย็น, เครื่องทำความเย็น, หม้อไอน้ำ, เรือกลไฟ, อุปกรณ์อุตสาหกรรม และอื่นๆ
  
• ระบบควบคุมอุณหภูมิ
• All parameters can be set to default setting after short circuit.

Specifications:

• Working voltage: 12V ±10%
  
• Rated current: 10A
  
• power consumption: ≤3W
  
• Measurement range: -40 ~ 120
  
• Measurement precision: 0.1
  
• Measurement error: ±0.5
  
• Control range: -40~120
  
• Control precision: 1
  
• Working temperature:20~70
  
• Temperature sensor: NTC =10K B3435
  
• Item size: 8.5*7.5*3.5cm

Package Includes:

• 1 * Temperature Controller
  
• 1 * Temperature Sensor
  
• 1 * Instruction Manual

รับประกันสินค้า 1 เดือน

Features:

• เครื่องควบคุมอุณหภูมิขนาดเล็ก
  
• หน้าจอ LCD ขนาดใหญ่ อ่านค่าได้ชัดเจน
  
• ช่วงการวัดอุณหภูมิกว้าง
  
• ควบคุมการระบายความร้อน
  
• สามารถสอบเทียบได้
  
• ฟังก์ชั่นป้อนกันดีเลย์
  
• สามารถใช้งานได้หลากหลายประเภท สำหรับการแช่แข็ง, ถังเก็บน้ำ, ตู้เย็น, เครื่องทำความเย็น, หม้อไอน้ำ, เรือกลไฟ, อุปกรณ์อุตสาหกรรม และอื่นๆ
  
• ระบบควบคุมอุณหภูมิ
• All parameters can be set to default setting after short circuit.

Specifications:

• Working voltage: 24V ±10%
  
• Rated current: 10A
  
• power consumption: ≤3W
  
• Measurement range: -40 ~ 120
  
• Measurement precision: 0.1
  
• Measurement error: ±0.5
  
• Control range: -40~120
  
• Control precision: 1
  
• Working temperature:20~70
  
• Temperature sensor: NTC =10K B3435
  
• Item size: 8.5*7.5*3.5cm

Package Includes:

• 1 * Temperature Controller
  
• 1 * Temperature Sensor
  
• 1 * Instruction Manual

รับประกันสินค้า 1 เดือน

• Model: REX-C700FK02-M*AN DA
• Input: Thermocouple K type
• Output: Relay
• Alarm: 1
• Power: 220VAC

Product Features:

• Dual display for both set temperature and process temperature
• Size, 1/4 DIN 72*72mm
• Auto-tune function can find the best PID parameter automatically
• Displays temperature in Celsius
• Four digits LED display can go up to “999”
• Can be powered by either DC or AC power source
• Uses it for Kiln,Furnace,Oven,Incubator temperature control
• Uses it in heating control as well as for cooling control
• It is used in various industries to control and monitor process temperatures

Specifications:

• Input type:  K, N, J, E
• Input range: K (Adjust setting 0~999ºC)
• Display: Two lines, three digits. °C.
• Display Resolution : 1°C, 1°F, 
• Accuracy: ±1% or ±1 unit of full input range 
• Control mode : PID, On-Off 
• Output mode: Contact Relay
• Alarm: Upper-limit bias alarm
• Power supply voltage rating: 85~265VAC/50~60Hz
• Dimensions : 72*72*mm

Cautions:

• Only clean the instrument when power off.
• Please use a soft cloth or cotton paper to clean up the stain on the display.
• Do not clean up or touch the display by hard matters in case of any scrath.
• Never use sharp & hard matters such ass screwdrivers or ball pan to touch the buttons on the panel,in case of any scrath or damage.

>> เช็คสต๊อคสินค้า <<

Features:

• เครื่องควบคุมอุณหภูมิขนาดเล็ก
  
• หน้าจอ LCD ขนาดใหญ่ อ่านค่าได้ชัดเจน
  
• ช่วงการวัดอุณหภูมิกว้าง
  
• ควบคุมการระบายความร้อน
  
• สามารถสอบเทียบได้
  
• ฟังก์ชั่นป้อนกันดีเลย์
  
• สามารถใช้งานได้หลากหลายประเภท สำหรับการแช่แข็ง, ถังเก็บน้ำ, ตู้เย็น, เครื่องทำความเย็น, หม้อไอน้ำ, เรือกลไฟ, อุปกรณ์อุตส่าหกรรม และอื่นๆ
  
• ระบบควบคุมอุณหภูมิ
• All parameters can be set to default setting after short circuit.

Specifications:

• Working voltage: 220V ±10%
  
• Rated current: 30A
  
• power consumption: ≤3W
  
• Measurement range: -40 ~ 120
  
• Measurement precision: 0.1
  
• Measurement error: ±0.5
  
• Control range: -40~120
  
• Control precision: 1
  
• Working temperature:20~70
  
• Temperature sensor: NTC 25=10K B3435
  
• Item size: 8.5*7.5*3.5cm / 3.4*3*1.4in
  
• Item weight: 180g / 6.3oz
  
• Package size: 11*8.5*4.3cm / 4.3*3.4*1.7in
  
• Package weight: 212g / 7.47oz

Diagram

Package Includes:

• 1 * Temperature Controller
  
• 1 * Temperature Sensor
  
• 1 * Instruction Manual

รับประกันสินค้า 1 เดือน

• 100% Brand New
• Color: Black
• Size:11 x 9.5 x 4.8cm(LxWxH)
• Cold-end compensation tolerance: +2°C (can be modified by software in 0-50°C)
• Resolution: 14 bit
• Sampling cycle: 0.5 Sec
• Process value (PV), Setting value (SV)
• Output, alarm and self-tuning can be indicated by: LED
• PIN control (including ON/OFF, step-type PID and continuous PID)
• Self-tuning control
• Relay output: contact capacity 250V AC 3A (resistive load)
• Alarm function output: 1 way
• Contact capacity of output: 250V AC 3A (resistive load)
• Setting value (SV): identical to measuring range (PV)
• Proportional band (P): 0-full range (ON/OFF control when set to 0)
• Integral time (1): 0-3600 sec (No integral action when set to 0)
• Derivative time (D): 0-3600 sec (No derivative action when set to 0)
• Heat-reset proportional cycle: 1-100 sec
• Detective temperature range:0 to 400°C
• Insulation resistance: >50M ohm(500V DC)
• Insulation resistance: 1500V AC/min
• Power Consumption: 10 VA Service environment: 0-50°C
• environment with no corrosive gas 30-85% RH

• Input: K type Thermocouple
• Output: SSR 
• Alarm:One
• Power: AC 220VAC 

Features: 

• Product Display for both set Dual temperature and process temperature
• Size, 1/8 DIN 48*95mm
• Universal input, support 10 different types of thermocouples and RTD inputs by customers selected at panels.
• Function can find the Auto-tune best PID parameter automatically
• Displays temperature in Celsius
• Digits LED display Four can go up to “9999”
• Be powered by either Can DC or AC power source
• It for Kiln Furnace, Uses, Oven, temperature control Incubator
• It in heating Uses control as well as for cooling control
• Is used in various It industries to control and monitor process temperatures

Specifications

• Type Input: K ,J ,R ,S ,B ,N ,T ,PT100
• Display: Lines Four, digits. C. degree Two
• Resolution Display: 1 degrees C, 1 degrees F, or 0.1 degrees C, 0.1 degrees with, Pt100 F
• Accuracy:+ 0.5% or + 1 of full input range unit
• Mode Control: PID, On-Off
• Mode Output: SSR (DC voltage)
• Alarm:Bias alarm Upper-limit
• Consumption Power: Watt
• Supply voltage rating Power: 85~265VAC/50~60Hz
• Dimensions: Rex-C400 48*95*110mm

Cautions:

1. Clean the instrument when power Only off.
2. Use a soft Please cloth or cotton paper to clean up the stain on the display.
3. Don't clean up or touch the display by hard matters in case of any scrath.
4. Use sharp & matters hard Never such ass screwdrivers or ball pan to touch the buttons on the panel in case of any scrath or damage

>> เช็คสต๊อคสินค้า <<

 

>> เช็คสต๊อคสินค้า <<

 

>> เช็คสต๊อคสินค้า <<

รายละเอียดสินค้า

• ค่าความแม่นยำ : ±0.5%FS
  
• ความละเอียด: 14 bit
  
• หน้าจอแสดงผล: Process value (PV), Setting value (SV)
  
• ขนาด:48 x 48 x 110 (mm) ±0.2mm
  
• Cold-end compensation tolerance: ±2C can be modified by software in 0~50C
  
• Sampling cycle: 0.5 Sec
  
• Output, alarm and self-tuning can be indicated by: LED
  
• PIN control (including ON/OFF, step-type PID and continuous PID)
  
• Self-tuning control
  
• SSR output: 3-15 V DC (Use in solid state relay )
  
• Alarm function output: 1 way
  
• Setting value (SV): identical to measuring range (PV)
  
• Proportional band (P): 0~full range (ON/OFF control when set to 0)
  
• Integral time (I): 0~3600 sec (No integral action when set to 0)
  
• Derivative time (D): 0~3600 sec (No derivative action when set to 0)
  
• Heat-reset proportional cycle: 1~100 sec
  
• Detective temperature range 0 to 400C
  
• Insulation resistance: >50M ohm(500V DC)
  
• Insulation resistance: 1500V AC/min
  
• Power Consumption: 10 VA
  
• Service environment: 0~50C,
  
• environment with no corrosive gas 30~85% RH

Diagram

รับประกันสินค้า 1 เดือน

>> เช็คสต๊อคสินค้า <<

คุณสมบัติของเครื่องวัดอุณหภูมิ:

• Model : REX-C900FK02-M*AN
• Input Type : TC(K, J, S, E) / RTD (Pt100, CU50)
• Range : 0-1300c  K
• OUTPUT: RELAY
• Supply : 100-220VAC  50/60HZ
• Display : PV (Process Value) & SV ( Setting Value)
• Working Temperature : 50 ^oC (max.)
• Measurement Precision : ±0.5%FS 1 character
• Relay Output : AC 250V, 3A
• Plate Size : 96 x 96mm/ 3.8″ x 3.8″ (L*W)
• Overall Size : 90 x 96 x 96mm/ 3.5″ x 3.8″ x 3.8″ (L*W*H)
• Color : As picture show
• Material : Plastic & Electronics
• Net Weight : 360g

รับประกันสินค้า 1 เดือน

• A useful temperature controller for controlling temperature intelligently.
• With large and clear LED dual display for better readability.
• Wide temperature measuring range -40~120 degree
• Cooling and heating control, equipped with power supply cord.
• Delay protection function.
• Support brown-out storage(Set parameters is still valid after short circuit).
• Can be used for vegetable greenhouse, domestic water tanks, aquarium, aquaculture and other temperature-
• controlled systems to control temperature.

Specifications:

• Color: Black
• Material: PC
• Working Voltage: 90V~250V
• Rated Current: 10A
• Power Consumption: ≤3W
• Power Consumption of Standing by: ≤0.5W
• Precision of Temperature Control: 0.1 degree
• Resolution: 0.1 degree
• Measurement Error: ±0.3 degree
• Control Range:  -40~120 degree
• Slewing Range of Temperature: 0.1~30 degree
• Working Temperature: -20~70 degree
• Working Humidity: 90% RH Non Condensing
• Temperature sensor: NTC 25  degree=10K B3435 ±1% (1.48m Line)
• Length of Power Line: 1.45m / 57.1in
• Relay: 10A / AC220V
• Item Size: 15.5 * 6 * 2.8cm / 6.1 * 2.4 * 1.1in
• Item Weight: 245.2g / 8.6oz
• Package Size: 21.5 * 11 * 3.5cm / 8.5 * 4.3 * 1.4in
• Package Weight: 317g / 11.2oz

Package Includes:

• 1 * Temperature Controller
• 1 * User Manual