>> เช็คสต๊อคสินค้า <<

This DIY digital oscilloscope kit adopts ARM Cortex-M3 processor and with 2.4-inch TFT screen and protective case. It's easy and reliable for circuit operation. It can display waveform parameters, such as frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.

Features:

• Adopt ARM Cortex-M3 processor (STM32F103C8), and include a 2.4-inch color TFT display screen.
  
• Used for secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.
  
• Come with instructions, easy to install and operate.
  
• With Auto/Normal/Single trigger modes, easy to capture the moment waveform.
  
• Available rising or falling edge trigger.
  
• Observable previous waveform before trigger(negative delay).
  
• Can freeze waveform display at any time(HOLD function).
  
• With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.
  
• Waveform storage function: will not lose the waveform after power off.
  
• Short-circuit and open-circuit detection: can help the user find out the soldering error.
  
• TFT controller recognition function.
  
• The SMD has been soldered, more suitable for electronic beginner.
  

Specifications:

• Maximum Real-time Sampling Rate: 1MSa/s
  
• Analog Bandwidth: 0-200KHz
  
• Sensitivity Range: 5mV/div-20mV/idv
  
• Maximum Input Voltage: 50Vpk (1X probe)
  
• Input Impedance: 1M ohms/20pF
  
• Accuracy: 12 Bits
  
• Record Length: 1024 points
  
• Coupling Modes: DC / AC / GND
  
• Time Base Range: 500s/Div – 10us / Div
  
• Trigger Modes: Auto, Normal, and Single
  
• Trigger Position: Center of Buffer
  
• Supply Voltage: DC 9V(8-10V)
  
• Current Consumption:~120mA @ 9V
  
• Main Board Size: 94 * 65mm / 3.7 * 2.56in
  
• Analog Board Size: 65 * 47mm / 2.56 * 1.85in
  
• Screen Size: 52 * 40mm / 2 * 1.57in
  
• Package Size: 14.5 * 10 * 3.7cm / 5.7 * 3.94 * 1.45in
  
• Package Weight: 179g / 6.33oz
  

Package List:

• 1 * Digital Oscilloscope DIY Kit
  
• 1 * Probe
  
• 1 * DIY Case
  
• 3 * User Manual(English)
     
  

ไม่มีรับประกันสินค้า

>> เช็คสต๊อคสินค้า <<

FNIRSI-TC2 ingeniously integrates digital oscilloscope, electronic component tester, PWM signal generator and other functions into one.Equipped with large-size color dot matrix TFT display.Built-in rechargeable lithium battery.Bring more practical functions to users with a small size,Also has good portability.

FNIRSI-TC2 has various working modes such as oscilloscope and component tester.Each time you click the power button, it will enter the mode selection interface.Press the [Up] and [Down] keys of the direction keys to select,Select “Mos Test” item, press【OK】key to enter component tester mode;Select the “Oscilloscope” item, press【OK】key to enter the oscilloscope mode.

“Mos Test” mode can test various types of transistors, and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance; can test capacitance, resistance, inductance components, etc.

FNIRSI-TC2 is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordless components, and preliminary screening of small batch components.”Oscilloscope” mode to test the signal waveform of the circuit.Support online operation with computer, you can refresh the official firmware by yourself and complete the upgrade.

It is hoped that FNIRSI-TC2 can make the study and work of the majority of users more efficient and interesting.

รับประกันสินค้า 6 เดือน

>> เช็คสต๊อคสินค้า <<

MUSTOOL ET826 เน้นการผสมผสานการทำงานสำหรับกระบวนการทดสอบภาคสนามไม่ใช่การเปลี่ยนมิเตอร์ มันสะท้อนถึงเทคโนโลยีชั้นสูงโดยใช้ชิปเฉพาะมีเป็นฟังก์ชั่นคลื่น คุณสามารถดูสัญญาณรูปคลื่น 20KHz ภายในเป็นจำนวนมากของสัญญาณเครื่องมือวัด

รายละเอียด:

• การแสดงผลสูงสุด: 3999 
• จอแสดงผล HD สีขาวสีดำ มุมมองขนาดใหญ่
• แบนด์วิดธ์: ACA/ACV/DCA/DCV 20KHZ
• ช่วงการวัด: ด้วยตนเอง/อัตโนมัติ
• กราฟแท่งอะนาล็อก: √
  
• ความจุ: 100 ข้อมูล 10 รูปคลื่น
• ปริมาตร: 0.1μF-100μF/10mF
  
• ความถี่y: 5HZ-5MHZ
  
• ความต้านทาน: 40เมกะวัตต์

รับประกันสินค้า 3 เดือน

>> เช็คสต๊อคสินค้า <<

 
MDSO dual-channel digital oscilloscope, with “low-cost, high-performance” as the design goals. well-designed bandwidth of 20M, 48M sampling rate, 2 channels, alternating support X, Y and XY alternating pattern of two-channel virtual oscilloscope, spectrum analyzer and data recorder.

Powerful analysis function :

• Support any multi-screen display, Easy to Variety of analysis;
• Support the input waveform interpolation;
• Support the input waveform, “add”, “subtraction” and “multiplication” synthesis;
• Support the input waveform plusRectangle, bartlett, triangular, cosine, hanning, bartlett_hanning, hamming, blackman, blackman_Harris, tukey, Nuttall, FlatTop, Bohman, Parzen, Lanczos, kaiser, gauss, dolph_chebyshev18 kind of window;
• Support the input waveform filtering and design filter;
• Support the input waveform, “Lissajous”, “Frequency”, “phase-frequency”, “logarithmic amplitude-frequency”, “self-power spectrum,” “logarithmic self-power spectrum,” “auto-correlation” and “cross-correlation “analysis;
• Support under logarithmic coordinate system, the input waveform, “Frequency”, “phase-frequency”, “logarithmic amplitude-frequency”, “self-power spectrum,” “logarithmic self-power spectrum,” “self-related” and “mutual related “analysis.

Powerful data recorder function:

• Support continuous data collection and storage, and can move, zoom, view global data, and compare multiple data collection
• High-speed USB2.0 for fast transfer, unlimited long the collected data, records into files for easy viewing and analysis of collected data
• 24M of continuous recording up to meet the capture function of the general agreement, such as SPI, IIC, UART, etc.

Oscilloscope features:

• Bandwidth 20M
• Sample 48M
• the number of channels: 2
• Input voltage range [-50V,+50V](With probeX10)
• Memory depth 1M*2
• AD Bit 8
• Software triggerrising, falling, rising / falling, differential, rising / falling+differential
• Analysis Waveform Synthesis: Add, subtract, multiply;
• Filter processing:IIR filter support “Butterworth”, “Chebyshev I”, “Chebyshev II”, “Elliptic” type of filter design; FIR filter supports arbitrary range of frequency sampling method , and Rectangle, bartlett, triangular, cosine, hanning, bartlett_hanning, hamming, blackman, blackman_Harris, tukey, Nuttall, FlatTop, Bohman, Parzen, Lanczos, kaiser, gaussand dolph_chebyshev, window method design
• Waveform analysis:Lissajous, Frequency, phase-frequency, logarithmic amplitude-frequency, self-power spectrum, logarithmic self-power spectrum, auto-correlation and cross-correlation.
• Grasp frame Continuous function of grasping the frame

Note: Due to computer USB voltage differences, the oscilloscope measurement results may have some bias, needs your own manual calibration, the specific reference to the oscilloscope use.

data recorder:

• Sample 0.25M~24M
• Channel 2
• Input voltage range[-50V,+50V](With probeX10)
• AD Bit8
• Data View The stored data can be continuous, and support global, zoom and move the viewing.

Note: The specific speed recorder with computer processing speed, and if use high sampling rate, the situation may break.

รับประกันสินค้า 3 เดือน

>> เช็คสต๊อคสินค้า <<

The FNIRSI-5012H is a versatile, highly practical, cost-effective handheld oscilloscope for the maintenance industry and the R&D industry with FNIRSI's real-time sampling rate of up to 500MS/s and 100MHz analog bandwidth.With full trigger function (single, normal, automatic), it can be used freely for both periodic analog signals and non-periodic digital signals. The built-in high voltage protection module can  withstand  up to 400V continuous voltage and 600V peak voltage. There is no need to worry about the oscilloscope burnout caused by the high voltage not being probed to the 10X position.Large time base scan mode that monitors slow level changes. Equipped with high-efficiency one-button AUTO, the measured waveform can be displayed without complicated adjustment. Display high-definition LCD screen with 2.4-inch 320*240 resolution IPS full-vision technology, the visual effect is very good. Extremely convenient and fast waveform storage function, built-in 64M storage space, can store up to 2000 waveform pictures, the storage process is simple and fast, save the current waveform anytime and anywhere, just one touch, no cumbersome tips and choices. Powerful waveform file manager, support for thumbnail browsing, viewing, detail viewing, page turning, deletion and more. Built-in 5000mah high-quality lithium battery, can be used continuously for 12 hours when fully charged.The body is equipped with high-quality silicone protective cover, non-toxic and lead-free environmental protection, anti-skid, anti-shock and shockproof, comprehensive protection of the fuselage, soft texture, feel very comfortable.

Features:

• Intelligent anti-burn,1X Can withstand up to 600V withstand voltage
• Afterglow display technology
• 2.4 inch color display screen with IPS technology
• 100MHz analog bandwidth @ 500MS/s sampling rate(1X = 5MHz,10X = 100MHz)
• One-button waveform storage
• Built-in 64M storage space, the maximum storage of 2000 waveform pictures
• Powerful waveform file manager, support thumbnail browsing, viewing, details view, flip, delete and other functions
• High measurement voltage range, 1X can measure 0 ~ 80 V, 10X can measure 0 ~ 800V
• Up to 12 parameters measurement: VPP, VP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty+, Duty-, Time+, Time-, Time
• At any time, the waveform display (pause function) is frozen
• Equipped with high efficiency One-button AUTO
• Complete triggering function (single, normal, automatic)
• Built in 5000mAh rechargeable lithium battery,Fully charged for 12 hours of continuous use
• Screen brightness adjustment
• Memory compression technology, waveform refresh screen does not flicker
• Anti-slip anti-drop silicone sleeve
• Ultra small volume, easy to carry

Specifications:

• Analog band width: 100MHz
• Maximum real time sampling rate: 500MS/s
• Vertical sensitivity: 50 mV/div ~ 100 V/div
• Horizontal time base range: 50S/div ~ 6nS/div
• Maximum test voltage: 80 V (1X probe), 800 V (10X probe)
• Storage depth: 128KB
• Input resistance: 1M
• ADC precision: 8bits
• Coupling mode: AC/DC
• Trigger mode: Single, Normal, Auto
• Trigger edge: Ascending/descending edge
• External trigger voltage 0 – 80 V
• Display: 2.4 inch – 320*240 – IPS process
• Power supply: 5000 mAh lithium battery
• Size: 114mm x 74mm x 33mm
• Weight: 300g

Package Includes:

• 1 x ADS5012H Oscilloscope Host
• 1 x Matching 100MHz Probe(1X and 10X)
• 1 x Micro USB Data Line
• 1 x User Manual (English)
• 1 x High Quality Package

รับประกันสินค้า 6 เดือน

>> เช็คสต๊อคสินค้า <<

LA104 is a compact, portable logic analyzer with a display screen. It is widely applied to avariety of industries and fields, such as automotive electronics, communication, power supply and computer.
Logic analyzer is used to analyze the logic relationship of digital systems, as it can collect and store multichannel digital signals and directly display their sequential relationship on the screen. The logic analyzer is equipped with the function of protocol analysis, and can parse logic signal of the protocol's physical layer into data of the high layer protocol and display them on the screen.

Features:

• Color display
• 4 Input Channels
• 100MHz Max Sampling Rate
• 100MHz Measuring Bandwidth
• Built In 8MB Flash Storage

Specifications:

• Dimensions: 40mm x150mm x103mm
• Weight: G.W 0.175g
• Battery: Exclude
• Channel: 4
• Max Sampling Rate: 100M Sa/S
• Min Captured Pulse width: 10ns
• Input Voltage Range: 0-5V
• Equivalent Input Impedance: 1MΩ
• Threshold Voltage: 1.2-3V
• Programmable Output Channel: 4
• Programmable Output Type: PWM,SPI,I2C,UART
• Programmable Output Amplitude: 3v
• 3V Power Output Channel: 1
• Storage: Built-in 8M Flash Storage
• Battery: Built-in 500mAh Lithium Battery
• Display: 2.8 ’ Color LCD Screen
• Size: 100mm*56.6mm*8.4mm
• Manual: Download

Part List

• Logic Analyzer: 1
• Hooks: 5
• Dupont Cables: 20
• Safety Instructions: 1

รับประกันสินค้า 6 เดือน

>> เช็คสต๊อคสินค้า <<

DSO-FNIRSI is a full function, high utility, high performance and cost-effective handheld oscilloscope for the maintenance industry and the R & D industry. The oscilloscope has a real-time sampling rate of up to 200MS/s and a 30MHz analog bandwidth. With complete triggering function (single, normal, automatic), both the periodic analog signal and the aperiodic digital signal can be used freely. Large time base scanning mode can monitor slow level changes. Equipped with high efficiency one button AUTO, the measured waveform can be displayed without complicated adjustment. Display the High Definition LCD screen equipped with 2.4 inch 320*240 resolution IPS full vision technology, the visual effect is very good, no eye, the oscilloscope on the market is almost used cheap TN screen, screen fan white. Extremely convenient and fast waveform storage function, built-in 64M storage space, the maximum storage of 2000 waveform pictures. Powerful waveform file manager, support thumbnail browsing, viewing, details view, flip, delete and other functions. Built in 3000mAh rechargeable lithium battery can be continuously charged for 10 hours at one time. Day mode and night mode can be changed according to their own preferences.

Key features:

• Memory compression technology, waveform refresh screen does not flicker
• Afterglow display technology
• 2.4 inch color display screen with IPS technology
• 30MHz analog bandwidth @ 200MS/s sampling rate
• Fast waveform storage
• Built-in 64M storage space, the maximum storage of 2000 waveform pictures
• Powerful waveform file manager, support thumbnail browsing, viewing, details view, flip, delete and other functions
• High measurement voltage range, 1X can measure 0 ~ 40 V, 10X can measure 40 ~ 800V
• Up to 11 parameters measurement: VPP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty+, Duty-, Time+, Time-, Time
• At any time, the waveform display (pause function) is frozen
• Equipped with high efficiency one button AUTO
• Complete triggering function (single, normal, automatic)
• Built in 3000mAh rechargeable lithium battery can be continuously charged for 10 hours at one time
• Day mode and night mode
• Ultra small volume, easy to carry

Specifications:

• Analog band width: 30MHz
• Maximum real time sampling rate: 200MS/s
• Vertical sensitivity: 50 mV/div ~ 200 V/div
• Horizontal time base range: 100mS/div ~ 125nS/div
• Maximum input voltage: 40 V (1X probe), 800 V (10X probe)
• Storage depth: 128KB
• Input resistance: 1M
• ADC precision: 8bits
• Coupling mode: AC/DC
• Trigger mode: Single, Normal, Automatic
• Trigger edge: Ascending/descending edge
• External trigger voltage 0 – 40 V
• Display: 2.4 inch – IPS – 320*240
• Power supply: 3000 mAh lithium battery
• Size: 90 x 70 x 28 mm
• Weight: 200g

Package includes:

• 1 x DSO-FNIRSI oscilloscope host
• 1 x Matching Special probe(1X and 10X)
• 1 x Micro USB data line
• 1 x User manual (English)

รับประกันสินค้า 1 ปี

>> เช็คสต๊อคสินค้า <<

Features:

• Built in DDS signal generator, support 12 kinds of function signal.
• Capture output signal function, which can store up to 1000 capture signals.
• Targeted high intelligent decoding algorithm, the encoderlifeis infinite, and intelligent anti-burn function, 1X Can withstand up to 400V withstand voltage.
• With 100MHz * 2 ana-log bandwidth and @ 1GSa/s sampling rate（1X = 5MHz, 10X = 100MHz).
• Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast.
• High measurement voltage range: 1X can measure 0~40 V, 10X can measure 0~400V.
• Up to 12 parameters measurement：VPP，VP，Vmax，Vmin，Vavg，Vrms，Frequent，Duty+，Duty-，Time+，Time-，Period.
• Cursor measurement function: it is convenient to manually measure the period and frequency and voltage.
• Complete triggering function (single, normal, automatic), and at any time, the waveform display (pause function) is frozen.
• Equipped with high efficiency One-button AUTO, and one-button waveform storage and screenshot function.
• Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data.
• Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc.
  
• Equipped with a USB interface, which can be connected to a com-puter to share its screenshots with the com-puter, which is convenient for secondary analysis.
  
• Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals.
  
• FFT display function, can analyze the spectral characteristics of the signal, memory compression technology, waveform refresh screen does not flicker.
  
• With the screen brightness adjustment function and background gr-id brightness adjustment function, also easy to carry.

Specifications:

• Material: ABS
• Ana-log band width: 100MHz * 2
• Number of channels: 2 channels
• Maximum real time sampling rate: 1GSa/s
• Vertical sensitivity: 50 mV/div ~ 500 V/div
• Horizontal time base range: 50S/div ~ 10nS/div
• Maximum test voltage: 40 V (1X probe), 400 V (10X probe)
• Storage depth: 240Kbit
• Input resistance: 1MΩ
• ADC precision: 8bits
• Coupling mode: AC/DC
• Trigger mode: Single, Normal, Auto
• Trigger edge: Rising edge/Falling edge
• External trigger voltage 0~40 V
• Extension ports: USB picture export
• Package size: 340 * 140 * 70mm / 13.4 * 5.5 * 2.8in
• Package weight: 1500g / 3.3lb

Packing list:

• 1 * FNIRSI-1014D Oscilloscope Host
• 2 * Matching 100MHz Probe (1X and 10X）
• 1 *Clip
• 1 * 5V2A Power Adapter
• 1 * USB Data Line
• 1 * English User Manual

รับประกันสินค้า 6 เดือน

>> เช็คสต๊อคสินค้า <<

แพคเกจ:

• 1 x DS1102E ออสซิลโลสโคปจัดเก็บข้อมูลดิจิตอล
• 2 x probes
• 1 x สาย USB
• 1 x สายไฟ
• 1 x เริ่มต้นอย่างรวดเร็ว (คู่มือผู้ใช้)

Advanced functions 

DS1000E series are the high-performance, economic digital oscilloscopes. They are widely used in the areas of education, training, production line, research and developm

Features and Benefits

• 2 Analog channels plus external trigger
• 1 Million point deep memory
• 1 GSa/sec max sample rate
• 5.7” TFT QVGA (320X240) with 64K color LCD backlit display
• Trigger modes: edge, pulse width, slope, video, pattern, continuous time, and alternate

Specification

• Model: DS1102E
• Bandwidth: 100MHz
• Memory Depth: 1M pts
• Analog Channels: 2
• Sample Rate: Real time 1GSa/s maximum,Equivalent 10GSa/s maximum
• Trigger: 5 kinds,display the trigger level,with shortcut key setting 50%
• Digital filter: High Pass, Low Pass, Band Pass and stopband with adjustable range
• Waveform record: Yes
• P/F: Yes
• Frequency counter: Yes
• Confusion inhibit: Yes
• MATH: × FFT
• Cursor measurement: Auto, manual, trace
• Probe decay: 1×,5×,10×,50×,100×,500×,1000×
• Vertical shelves fine/coarse adjust: Selectable,press SCALE to realize
• “Button backlight”: Yes
• Multi-level menu: Yes
• Delay scan(windows extension): Press [SCALE],split screen display
• AUTO: After AUTO show multi-period,single period,rising edge,fall edge display option
• “Shortcut key”: DS1000 have 6 button to realize “quickly return to zero”, ”select confirm”, ”delay scan”, ”shelves adjust switch”
• function. etc.
• Help: Press button for 3 sec.

Package:

• 1 x DS1102E digital storage oscilloscope
• 2 x probes
• 1 x USB Cable
• 1 x Power cord
• 1 x Quick start (user manual)

รับประกันสินค้า 1 ปี

>> แจ้งความต้องการสินค้า <<

DS1000Z Plus Series is the new mainstream digital scope to meet the customer's applications with its innovative technology. MSO1000Z Series has 16channels, target for the embedded design and test market with its industry leading specifications, powerful trigger functions and broad analysis capabilities.

Advanced functions / ฟังก์ชั่นขั้นสูง

• Compact size, Light weight, Easy to Use 
• ขนาดกะทัดรัด น้ำหนักเบา ใช้งานง่าย

• 4 analog channels, 16 digital channels (for MSO1000Z and MSO upgradable for DS1000Z Plus)
• 4 ช่องสัญญาณอนาล็อก 16 ช่องสัญญาณดิจิตอล (สำหรับ MSO1000Z และ MSO ที่อัพเกรดได้สำหรับ DS1000Z Plus)  

• UltraVision: Deeper memory(Std.12Mpts,Opt.24Mpts)
• UltraVision: หน่วยความจำลึก (Std.12Mpts, Opt.24Mpts)

• UltraVision: Up to 30,000 wfms/s Waveform capture rate
• UltraVision:  อัตราการจับรูปคลื่นสูงสุด 30,000 wfms/s

• UltraVision: intensity graded color display
• UltraVision: จอแสดงผลสีระดับความเข้ม

• UltraVision: waveform recording and playback functions (optional)  
• UltraVision: ฟังก์ชั่นการบันทึกและเล่นรูปคลื่น (อุปกรณ์เสริม)

• A variety of trigger functions
• ฟังก์ชั่นทริกเกอร์ที่หลากหลาย

• Built-in dual-channel 25 MHz source(MSO1XX4Z-S and DS1XX4Z-S Plus)
• แหล่งสัญญาณ Dual-channel 25 MHz ในตัว (MSO1XX4Z-S และ DS1XX4Z-S Plus)

• Optional serial bus trigger and decoding functions(RS232/UART, I2C, SPI)
• ฟังก์ชั่นทริกเกอร์บัสอนุกรมและฟังก์ชั่นถอดรหัสที่เป็นตัวเลือก (RS232 / UART, I2C, SPI)

• Mixed Signal Analysis with analog and digital channels (MSO)
• การวิเคราะห์สัญญาณแบบผสมพร้อมช่องสัญญาณอนาล็อกและดิจิตอล (MSO)

• Easy to be grouped and labeled for digital channels (MSO)
• ง่ายต่อการจัดกลุ่มและติดป้ายกำกับสำหรับช่องสัญญาณดิจิตอล (MSO)

• Serial bus triggering and decoding on digital channels (MSO)
• บัสแบบทริกเกอร์และถอดรหัสบนช่องสัญญาณดิจิตอล (MSO)

• Serial bus triggering and decoding on digital channels (MSO)
• บัสแบบทริกเกอร์และถอดรหัสบนช่องสัญญาณดิจิตอล (MSO)

DS1000Z Plus Series is the new mainstream digital scope to meet the customer's applications with its innovative technology. MSO1000Z Series has 16channels, target for the embedded design and test market with its industry leading specifications, powerful trigger functions and broad analysis capabilities.

Features and Benefits

• 50MHz Bandwidth, 4 channels
• 1G Sa/s Real-time Sample Rate
• 12Mpts (Std.) and 24Mpts (Opt.) Memory Depth
• Innovative “UltraVision” technology
• Up to 30,000wfms/s Waveform Capture Rate
• 7 Inch WVGA (800×480), multiple intensity levels waveform display

Specification

• Model: DS1054Z
• Bandwidth: 50 MHz
• Analog Channels: 4
• Sample Rate: 1GSa/s (Single-channel), 500MSa/s(Dual-channel), 250MSa/s(Fulll-channel)
• Max Memory Depth: 12Mpts(standard) ,24Mpts(option)
• Max. Waveform Capture rate: Up to 30,000 wfms/s
• Real Time waveform Record and Replay: Up to 60, 000 Frames(Opt.)
• Std. Probes:  PVP2150 150MHz  passive  Probe:4 sets
• Built in 2 Ch Source: No

รับประกันสินค้า 1 ปี

>> แจ้งความต้องการสินค้า <<

Features and Benefits: 

คุณสมบัติและประโยชน์:

Lower noise floor,better weak signal capture abilit

ชั้นเสียงต่ำ, ความสามารถในการจับสัญญาณที่ดีขึ้น

Up to 50,000 wfms/s waveform capture rate

อัตราการจับรูปคลื่นสูงสุด 50,000 wfms/s

Up to 56Mpts deep memory

Realtime waveform record,replay and analysis functions

ฟังก์ชั่นบันทึกรูปคลื่นเรียลไทม์ เล่นซ้ำ และวิเคราะห์

Serial bus triggering and decoding

UltraVision: Deeper Memory with Multi-Level intensity grading display(Up to 256 levels)

หน่วยความจำที่ลึกกว่าพร้อมจอแสดงผลระดับความเข้มหลายระดับ (สูงสุด 256 ระดับ)

Built-in 2CH signal generator(-s model)

เครื่องกำเนิดสัญญาณ 2CH ในตัว (รุ่น -s)

Complete Connectivity USB Host,USB Device,LAN,AUX

The DS2000A series digital oscilloscope is another Best-In-Class instrument from Rigol offering an unmatched feature/value package. The DS2000A is a fast and versatile scope covering frequencies up to 300 MHz with two channels and a wide vertical range (500uV/div-10V/div) to deliver an extremely low noise floor to help you capture smaller signals. Add a 2 GSa/s max. sample rate and 14 Mpts. of standard memory depth to its user-friendly interface and 8 inch WVGA display and you've got a scope that outperforms the competition in a wide range of bench-top and field applications.

Features and Benefits

• Wider vertical range(500uV/div ~ 10V/div), lower noise floor, better for small signal capturing
  
• Full bandwidth, lower overshoot(<5%), perfect frequency response design
  
• Bandwidth 70MHz
  
• Max. Sample Rate 2G Sa/s
  
• Standard Memory Depth up to14Mpts,Optional Memory Depth up to 56Mpts
  
• Innovative “UltraVision” technology
  
• 50 Ohm Impedance includ

Specification

• Model: DS2072A
• Bandwidth: 70 MHz
• Analog Channels: 2
• Sample Rate: 2 GSa/s
• Max Memory Depth: 14Mpts(standard) ,56Mpts(option)
• Display: 8 inch LCD display
• Standard Interface: USB Host & Device, RS-232, P/F Out
• Impedance: High Impedance and 50 Ohm matching

รับประกันสินค้า 1 ปี

>> แจ้งความต้องการสินค้า <<

Rigol's new DSA815 spectrum analyzer redefines the product category by setting new standards for performance and price. The DSA815 features a unique widescreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production. The new spectrum analyzer offers the ability to measure smaller signals using our digital IF filter, which allows for smaller bandwidth settings and reduces displayed noise levels. The DSA815 also distinguishes between signals with a frequency difference as little as 100 Hz.   The DSA815 includes a wide range of standard functions including AM/FM demodulation and a preamplifier. In addition, Rigol offers great options including an EMI filter and quasi-peak detector kit and a 1.5 GHz tracking generator. So before your next compliance test, check out the DSA815… save one trip to the compliance lab and it pays for itself! 

Features:

• 9 kHz to 1.5 GHz Frequency Range
  
• Typical -135 dBm Displayed Average Noise Level (DANL)
  
• -80 dBc/Hz @10 kHz offset Phase Noise
  
• Total Amplitude Uncertainty
• 100 Hz Minimum Resolution Bandwidth (RBW)

Specifications:

• Frequency Range: 9kHz – 1.5GHz
  
• DANL*1: -135dBm, typical
  
• Phase Noise: -80dBc/Hz @10kHz offset, typical
  
• Total Amplitude Accuracy*2: <1.5dB
  
• Minimum RBW: 100Hz
  
• RF Input Maximum Level
  
• Interfaces: USB host & device, LAN, GPIB (optional), 10 MHz REF In, 10 MHz REF Out, External Trigger In
  
• Trigger Source: Free Run, Video, External
  
• External Trigger Level: 5 V TTL Level
  
• Dimensions: Width X Height X Depth = 361.6 mm X 178.8 mm X 128 mm
  
• Weight: 4.25 kg

*1: 100Hz RBW, standard preamplifier on, trace average >= 50, sample detector, typical
*2: 95% confidence level

รับประกันสินค้า 1 ปี