>> เช็คสต๊อคสินค้า <<

• Module Name: 72W boost module
• Module properties: non-isolated module
• Input Voltage: 8-32V
• Output voltage :12-35V   (adjustable)
• Output current: 3A (12V turn to 24V) ; 5A(12V turn to 19V)  (exceed 4A please enhance heat dissipation)
• Output power: 72W (natural cooling), 100W (enhance heat dissipation )
• Output ripple: less than 50mV ,20M bandwidth
• Conversion efficiency: efficiency 92%(12 turn to 24V 3A ),  efficiency 93%(12 turn to 19V 3A)
• Operating temperature: Industrial grade -40°c to +85°c (ambient temperature exceeds 40 degrees, reduce power or plus fan)
• Full load temperature rise: 45°c
• No-load current: typical 30mA
• Load Regulation: ± 0.5%
• Voltage Regulation: ± 0.5%
• Dynamic response speed: 5% 200uS
• Short circuit protection: None (please enter retrofitting fuse or protective circuit)
• Input reverse polarity protection: None (If need please install diode at input port )
• Wiring: Terminals, Needn't solder, V-IN input, V-OUT output
• Module size: 65mm x 51mm

• DIY an output adjustable vehicle power supply, 12V input,14-35V output (adjustable)
• Universal Car Laptop power. 12V Input , the output can be adjusted to the laptop operating voltage
• Boost charger,such as, for the 24V battery
• Power supply for electronic equipment
• Front of a system power supply:when the input voltage is 10-18V and the system board requires about 24V output(high power)

• Input voltage must be less than the output voltage, for example,when 24V output ,the range of input is 8-24V
• 12V 1 meter wire(1.5 m2),if longer than 1 meter,please use larger wire .
• When needs to work on high-power, high-temperature or plus shell  please install a fan, be sure the  temperature of module heat sink not exceed 80°c
• 12V battery discharge voltage should not be lower than 10.5V, Li-ion battery used in tandem (single 3.7V) discharge voltage should not be lower than 2.7V

รับประกันสินค้า 7 วัน

>> เช็คสต๊อคสินค้า <<

รายละเอียดสินค้า

• Module Properties: non-isolated step-up module (BOOST)
• Input voltage: 8-60V
• Input Current: 20A
• Quiescent current: 15mA (12V liter 20V, the output voltage, the higher the current will increase too quiet)
• Output voltage: 12-83V continuously adjustable            
• Output Current: 20A MAX  Over 15A, please enhance heat dissipation (input, output pressure related, the greater the pressure the smaller
• the output current)
• Constant Range: 0.5-20A

Output Power:

• Input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W,
• Enter 36V * 20A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W
• If you need more power, you can use two modules in parallel, such as the output to 30A, two modules can be used in parallel,
• The current per module can be adjusted to 15A.
• Working temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation)
• Operating frequency: 150KHz
• Conversion efficiency: up to 95% (efficiency and input and output voltage, current, pressure related)
• Overcurrent protection: Yes (with reduced flow adjustment, adjustable output current limit, current exceeds the current limit, the output current is automatically reduced to a minimum 5A, vary according to the nature of the load current will be.)
• Short circuit protection: Yes (input 20A fuse) double short circuit protection, the use of more security.
• Input reverse polarity protection: None, (if necessary, please enter the string into the diode)
• Output Counter filling: Yes, for charging plus blocking diode is not required.
• Installation: four 3mm screws
• Connection: solderless terminals output

รับประกันสินค้า 15 วัน