>> เช็คสต๊อคสินค้า <<

รายละเอียดสินค้า

• รุ่นสินค้า: DF-96ED 
• แรงดันไฟฟ้า: AC 220V/50HZ
• กระแสสูงสุด: 10A (ใช้การหน่วงเวลา 30A)
• การติดตั้ง: ติดตั้งบนราง
• การใช้พลังงาน: ≤2W
• การส่งผ่านสัญญาณ : รัศมี 500 เมตร
• ขนาด: 126 * 88 * 51 มม.

แพคเกจ: 

• สวิตช์ควบคุมระดับน้ำ 1 ชิ้น
• เซนเซอร์ 200 ซม. 3 ชิ้น

Single-control UP pool (water storage) installation instructions shown in figure 1

• A(red)-Upper water level control point. When water level gets to A point, the probe touch water and controller can stop the pump by auto.
• B(blue)-Lower water level control point. When water level gets off B point, the probe out of reach water and controller can start the pump by auto.
• C(black)-Should be placed in bottom of pool as the common line.
• D(green) and E(yellow)are connected with C (black).

Single-control DOWN pool(drain water)installation instructions shown in figure 2.

• E-Upper water level control point. When water level gets to E point, the probe touch water and controller can start the pump by auto.
• D-Lower water level control point. As liquid level gets off D point, the probe out of reach water and controller can stop the pump by auto.
• C-Should be placed in bottom of pool as the common line.
• A&B-disconnected

Lack of water protection installation instructions shown in figure 3.

• C&D-Lower water level control points. When water level gets off this point,
• C or D probe out of reach water and controller can stop the pump by auto.
• E&C-short-connected;
• A&B-disconnected

Joint control UP and DOWN pool installation instructions shown in figure 4.

• A-Upper water level control point in UP pool. When water level gets to A point,the probe touch water and controller can stop the pump by auto.
• B-Lower water level control point in UP pool. When water level gets off A point, the probe out of reach water and controller can start the pump by auto.
• C-Should be placed in bottom of UP and DOWN pools as the common line.
• D-Lower water level control point in DOWN pool. When water level gets off D point, the probe out of reach and controller can stop the pump by auto.
• E-Upper water level control point in DOWN pool. When water level gets to E point, the probe reach water and controller can start the pump by auto. Then pool starts to drain water. If not, E point disconnected

Used to solve problem:
1. On power but no work:

• a. Check the red indicator is on or not. If not, make the connection is good enough;

2. When water level is above or below probes but the pump does not start or stop by auto, Please check it like the following.

• a. Whether the probe is placed too high or low so that water level can reach or out of reach it
• b. The connection of upper &lower line or probe is dislocation by error or short connected
• c. To check the probe whether it is rust or not or the connection is good enough.
• d. C- Check the common line whether it is placed in the lowermost bottom of pool.

Product Description

• Type: DF-96ED Updated version
• Working voltage: AC 220V/50HZ
• Max Current: 10A(Use the 30A Delay)
• Installation: Din Rail Mount
• Power consumption≤2W
• transmission signal: 500M
• Size: 126*88*51mm

Package include:

• 1pcs Automatic Water Level Controller Switch
• 3pcs 200CM Sensor

รับประกันสินค้า 3 เดือน

>> เช็คสต๊อคสินค้า <<

คุณสมบัติทางเทคนิค

• ชื่อสินค้า: สวิตช์ควบคุมระดับ
• รุ่น: DF – 96D
• เหมาะสำหรับ: ของเหลว
• อินพุต: AC 220V
• เอาท์พุท: AC 220V 5A
• ไฟแสดงสถานะ: สีแดง (ไฟแสดงสถานะ) สีเขียว(ตัวชี้วัดที่ขาออก) 
• ขั้ว: 10 
• ประเภทการติดตั้ง: 35mm ราง DIN ติดตั้ง
• ขนาด: 102 x 50 x 66mm / 4″ x 2″ x 2.6″ (L * W * T) 
• วัสดุ: พลาสติก, ชิ้นส่วนอิเล็กทรอนิกส์
• น้ำหนักรวม: 230 กรัม

Function and Application

• The product is designed in integrated circuit, combined with the upgrade
• of water level classification through upper and lower pools of water tower
• of high-rise buildings. It can effectively prevent pool drainage, water overflow by automatically water supplement or decrease, absolutely prevent the pump from damaged. It is very suitable for the water supply project on water towers or wells in schools, industrial and mining enterprises from urban or rural. More, it is
• widely used in printing, chemical, food, beverage, wine, sugar and so on.

Technical Specifications

• Product Name: Level Controller Switch
• Model: DF-96D
• Fit for: Liquid
• Input: AC 220V
• Output: AC 220V 5A
• Indicator Light: Red(Power Indicator)Green(Output Indicator)
• Terminals: 10
• Mounting Type: 35mm DIN Rail Mounting
• Size: 102 x 50 x 66mm/4″ x 2″ x 2.6″(L*W*T)
• Material: Plastic, Electronic Parts
• Net Weight: 204g
• Total Weight: 230g
• Package Content : 1 x Level Controller Some Fixing Parts

รับประกันสินค้า 3 เดือน