>> แจ้งความต้องการสินค้า <<

.

Specifications

• Type: Digital exposure meter for ambient and flash light
  Receptor Head: Rotating Domed Head 90° to the right, 180° to the left, Retractable for Contrast Reading
  Light Receiving Method: Incident light and reflected light
  Receptor Incident Light: Dome retracts for contrast readings
  Receptor Reflected Light: 5° Viewfinder (Separate Accessory)
  Light Receptor Element: 2-Silicon photo diodes (incident and reflected)

Measuring Range and Modes

• Measuring Modes Ambient Light:
  – TF Priority
  – HD Cine – Shutter priority metering, FPS (Frame Rate Priority) metering, Lux/FC
  – Cine – FPS (Frame Rate Priority) metering, Shutter Angle setting, Lux/FC
  – Simple brightness measurement (foot-lambert, cd/m2
  – Simple illumination measurement (lux, foot-candle)
  – Aperture priority metering
  – EV metering
  – Shutter priority metering
  
• Measuring Modes Flash:
  – Without synchro cord (cumulative and non-cumulative)
  – With synchro cord (cumulative and non-cumulative)
  
• Measuring Range (ISO 100) Ambient Light:
  – Incident light EV-2 to EV 22.9
  – Reflected light EV3 to EV 19.9 (requires accessory sold separately)
  
• Measuring Range (ISO 100) Flash:
  – Incident Light f/1.0 to f/128.9
  – Reflected Light f/2.8 to f/128.9 (requires accessory sold separately)
  
• Measuring Range Illuminance: 0.63 to 2000000lux – 0.10 to 180000FC
  
• Measuring Range Brightness: 1 to 980000 cd/m2 – 0.29 to 290000 foot lamberts

Display Range and Modes

• Display Range Film Speed: ISO 3 to 409600 (in 1/3 steps)
  
• Display Range Shutter Speeds Ambient: 30 min to 1/64,000 sec. (in 1, 1/2, 1/3 steps) plus 1/200, 1/400
  
• Display Range Shutter Speeds Flash: 30 min to 1/1000 sec. (in 1, 1/2, 1/3 steps) plus 1/75, 1/80, 1/90, 1/100, 1/200, 1/400
  
• Display Range Aperture: f/0.5 to f/161.2 (in 1, 1/2, 1/3 steps)

Other

• Battery(Power): (2) Type AAA 1.5V Battery Alkaline, Manganese, Lithium, NiCad, NiMH, nickel types

รับประกันสินค้า 6 เดือน

>> แจ้งความต้องการสินค้า <<

.

This is CE version of PocketWizard radio triggering frequencies for use in Europe, Asia, Australia and other areas with 433.62 MHz for channels 1-16, and 434.22 MHz for channels 17-32

Important Note: NOT compatible with FCC version of PocketWizard (commonly found in USA, Canada and other areas) where frequencies are 344.0 MHz for channels 1-16, and 346.5 to 354.0 MHz for channels 17-32.

Sekonic's new LITEMASTER PRO L-478DR meter is the world's first touch-screen-operated light meter. It has an array of unique, must-have features for both still and motion story tellers. Its compact size is both instantly familiar and comfortable to use. The large LCD (2.7″) displays ambient, flash, cine and a host of other information in a clear and understandable way. Settings are made by simply touching or sliding a finger over the screen.

The L-478DR can be quickly calibrated to your camera using Sekonic's Data Transfer software and either Sekonic or X-Rite Brand targets or by manually inputting data to the DTS program or on the meter itself.

Keeping pace with wireless advancements, the L-478DR comes complete with exclusive PocketWizard® ControlTL® technology which combines light measurement and flash power control providing amazing control in your hand.

Color Touch Screen Interface and Design

• The touch screen provides a more intuitive style of navigation and allows you to simply touch the settings you wish to adjust. Menu navigation is intuitive and the handling of various configurations becomes an expedited process.
• Simple visual layout provides a clear view of your exposure setting and permits customization in regard to the information you wish to be displayed (including a choice of analog exposure scales (EV or f/-stops); 1, 1/2, or 1/3 step increments; the inclusion of 1/10 stops; and the option to hide metering modes you do not use frequently).
• One physical menu button provides access to a more in-depth menu system that is then navigated through the touch screen. This menu allows for you to program exposure profiles and modify custom settings for your meter.
• Measure and memory buttons are located on the side of the device for recording and initiating exposure readings. A PC sync terminal is located on the bottom of the device for direct, corded flash metering. A USB terminal is located on the side and provides a connection point to your computer for firmware updates and for loading exposure profiles to your meter. The attached light receptor features a retractable Lumisphere that can be rotated 90° clockwise or 180° counter-clockwise. It is also removable in order to facilitate the use of optional attachments.

Wireless Flash Power Control

• Wirelessly control and modify the power output of PocketWizard-mounted/enabled strobes or flashes directly from your meter.
• Three sliders allow you to dial up or dial down flash power from full to 1/64th power directly from the meter.
• Up to three zones can be managed; when working with more than one zone, determine each zone's values individually in order to establish desired lighting ratios, then an overall exposure sum will be determined.

Versatility Between Metering Methods

• Ability to measure incident or flash light and display exposure readings as f/-numbers, shutter speeds, or ISO settings for use with still imaging, HD video, and cine uses. Exposure constants also include frame rate and shutter angle for a variety of motion uses.
• Also capable of measuring illuminance as footcandles/lux or luminance as candela per square meter/foot-lamberts.
• Flash metering can display the percentage of flash-to-ambient light within the scene for precise lighting ratios.
• Comparative metering can be accomplished by using the AVE/EV function; allowing you to set a standard reading and have subsequent readings shown as the difference in exposure value.
• Cinematic modes offer creative options for setting frame rates between 1 to 1000fps or shutter angles from 1° to 358°.
• Filter compensation mode enables you to directly apply the effects of filters to your exposure reading. Up to four different filter factors can be applied at once, and up to 30 different filter factors can be stored for use (24 common filters are pre-programmed, including CTB, CTO, ND, +/- green, and 85 amber filters).

Custom Profiling

• You can enable and disable different metering modes from showing up in menus, allowing you to configure the meter to your own personal workflow.
• Calibration and custom profiling can be accomplished in accordance to your own personal camera by executing a series of exposure tests, processing the tests through Sekonic's Data Transfer Software (included), and outputting the results as a personal profile for use with your meter. These personal profiles confine your meter to work within your specific camera's dynamic range (up to 10 distinct profiles can be saved). Profiles can also be modified or created directly through the meter.

Display Range

• Compensation- EV -9.9 to 9.9 (in 1/10 steps)
• Filter Compensation- EV -5 to 5 (in 1/10 steps)
• Contrast- EV -9.9 to 9.9 (in 1/10 steps)
• Analog- T scale: 4 to 1/2000 sec. (in 1/3 steps)
   – F scale: f/1.0 to f/90 (in 1/3 steps)
   – EV scale: EV -3 to 3 (incident light, in 1/3 steps) / EV -7 to 7 (reflected light, in 1/3 steps)
   – Illuminance lux: 0 to 50,000 lux
   – Illuminance fc: 0 to 5,000 fc
   – Luminance cd/m2: 0 to 2,500 cd/m2
   – Luminance fl: 0 to1,000 fl
• EV- EV -27.9 to 55.8 (only effective with ambient light)
• Shutter Angle- 1° to 358° (20 types other possible settings)
• Frame Rate (f/s)- 1 to 1000 (20 types other possible settings)
• Aperture- f/0.5 to f/162.2 (in 1/3 steps)
• Shutter Speed- Ambient: 30 min. to 1/6400 sec. (in 1, 1/2, and 1/3 steps), 1/200 and 1/400 sec. also available
  Flash: 30 min. to 1/1000 sec. (in 1, 1/2, and 1/3 steps), 1/75, 1/80, 1/90, 1/100, 1/200, and 1/400 sec. also available
• ISO- ISO 3 to 409600 (in 1/3 steps)

ColorChecker Passport

The X-Rite ColorChecker Passport provides three photographic targets in a compact, durable case which minimizes color patch fading. Utilizing the included camera calibration Software, the ColoChecker allows you to quickly and easily capture accurate color, enhance portraits and landscapes, and maintain color control and consistency from capture to edit. The Creative Enhancement Target provides enhancement patches and allows you to check shadow details and highlights and check and control color shifting. The Classic Color Target lets you evaluate specific colors and create a DNG profile and the White Balance Target will allow you to have consistent, customized, in-camera white balance. Also included is a built-in stand to provide you with optimal shooting angles.

Sekonic Gray Balance Card

Also housed in the ColorChecker Passport and only available bundled with the LiteMaster L-478-Series meters is the specially produced Sekonic Gray Balance Card. The purpose of the Sekonic Gray Balance Card is to enable reflected-light calibration when using the separately purchased Viewfinder 5º attachment. There is an “Incident Only” calibration method available with Sekonic's Data Transfer System that needs no additional accessories.

Data Transfer System

Sekonic's Data Transfer System (DTS) simplifies exposure and meter calibration using the X-Rite ColorChecker Passport with Sekonic Gray Balance Card. With Sekonic's DTS Version 3, you can create an exposure profile and map out the dynamic range of your DSLR or digital video camera. Transferring this data to the Sekonic L-478DR meter enables it to recognize which details of a scene or subject will be properly imaged and which will be over or under the range of the camera. There are two ways to calibrate the L-478DR meters using Sekonic's DTS Version 3 software: incident-only calibration using Sekonic's DTS enables creating exposure profiles for precise metering without need for additional accessories, and reflected-light calibration requires the L-478-series Viewfinder 5° attachment, available separately, to read the Sekonic Gray Balance Card for calibrated reflected-light readings.

รับประกันสินค้า 6 เดือน