>> แจ้งความต้องการสินค้า <<

Direction for Use

• Correctly connect the Control Box,Handset,Power Wire,Lifting Column,  Patch Cord.

• Plug the power cord into 110VAC outlet:The Digital Tube will display “PON” for seconds it means electrified successfully,need to reset.
    – After reset the Digital Tube will display 23(MM),reset finished.
  RESET:
    – Press and hold the down button, after 5 seconds the desk will begin to lower, until to the lowest height then slightly rise.Reset finished.
    – Release the down button.
• After reset,press and hold “UP” button,lifting column will rise,release to   Stop.
• After reset,press and hold “DOWN” button,lifting column will fall, release to Stop. 
• How to memory:
    – After pressing and holding UP/DOWN button to a height,press button S first,then press button 1,this height will be remembered by button 1.Still  pressing and holding UP/DOWN button to another height,press button  S,then press button 2,this height will be remembered by button 2.The same way,the button 3,4 can remember other heights.
    – After memory,press 1/2/3/4 button,desk will motion to the height it   remembers,press “UP” and “DOWN” button.The motion will be stopped.

Application scenario:

Notice

1. This product must be used under the correct technical parameters.
2. Keep away from liquids,corrosive gases,dusty environment.
3. Contact our factory when necessary.

Package

• 1 x Two-foot two-section Lift Desk(Without desktop)
• English user manual will send by Email