เปิดทำการทุกวันจันทร์-เสาร์ หยุดวันอาทิตย์ : 02-992-7091, 02-992-6358
ดูรถเข็น เพิ่ม “รีเลย์ควบคุมอุณหภูมิ 5V Thermal Sensor Module Relay Module Combo Module thermistor temperature sensor module” ในตะกร้าเรียบร้อย
ab01
ab03ab04ab02

เครื่องควบคุมอุณหภูมิพร้อมเซนเซอร์ DC12V Digital LED Temperature Controller 10A Thermostat Control Switch Probe

รหัส TPC026
ราคา 280 บาท

TPC026

มีสินค้าอยู่ 4

รายละเอียดสินค้า

เครื่องควบคุมอุณหภูมิพร้อมเซนเซอร์ DC12V Digital LED Temperature Controller 10A Thermostat Control Switch Probe

บอร์ดควบคุมอุณหภูมิ ใช้สำหรับควบคุมช่วงอุณภูมิที่ต้องการ ตามที่กำหนด
ย่านการควบคุมอุณหภูมิอยู่ในช่วง -50 ถึง 110 องศาเซลเซียส

รูปภาพ:

Features:

  • Supply voltage: 12V
  • Temperature range: -50-110 degree
  • Control accuracy: 0.1 degree
  • Load power: 12V   /  120W
  • Measuring input: NTC10K waterproof probe L = 1Meter
  • Output capacity: 10A
  • Installation pitch: 73mm (aperture 4mm)
  • Dimensions: 60 * 45 * 31mm

12v Wiring:
Tip: 12V DC power supply or you can use a transformer power supply 12V output
Note: The product is directly output, so when the output terminals are not connected load, do not energized, to prevent contact with two wires and ignition

What is a direct output:
This thermostat output and input voltage are synchronous, meaning that the thermostat in the operating state (lights), How much input voltage and How much is the output voltage directly.When the thermostat (lights out) in the work, the output end there will be no voltage output
 
Intelligent judgment modes of operation:
Start temperature Start temperature> stop temperature = cooling mode

Heating mode setting mode:
Setting Tips: Start temperature
 
Setting mode:
1. Long Press up button, start the temperature of the flash,Through up and down keys to set the start temperature
2.Long Press Down button, stop the temperature of the flash,Through up and down keys to set the stop temperature

Use case:
Control water heaters, heated to 65 degrees to stop, the temperature dropped to 50 degrees to start heating again, how to set?
Step 1: Determine the operating mode for the heating mode, starting temperature Step Two: long Press the up button, the temperature starts flashing up and down keys to set the starting temperature of 50 degrees
The third step: Press the button down, the temperature stops flashing, stop by the arrow keys to set the temperature to 65 degrees, setting is completed.

Cooling mode is set up:
Setting Tips: Start temperature> stop temperature (the program automatically determines the operating mode to cooling mode)
Setting mode:
1. Press the button on the key to start the temperature of the flash, up and down keys to set the start temperature
2. Long press the key button to stop temperature flash, stop up and down keys to set the temperature value

Use case:
Control farms, ventilate to 26 degrees stopped, the temperature rose to 28 degrees start cooling again, how to set?
Step 1: Determine the operating mode is a cooling mode, starting temperature> stop temperature
Step Two: Long Press the button raised, the temperature starts flashing up and down keys to set the starting temperature of 28 degrees
The third step: Press the button down, the temperature stops flashing, set the stop up and down keys to a temperature of 26 degrees set.

Tip: set the heating mode, if you do not accidentally set the temperature set value is inverted, the output light is off, the load does not work, if there is the case after setting above, you can check the temperature value is not reversed .

package include:

  • 1pc -50-110 Degree Heat Cool Digital Thermostat

 

รับประกันสินค้า 15 วัน

 

ข้อมูลเพิ่มเติม

น้ำหนัก 0.200 kg

รีวิว

ยังไม่มีบทวิจารณ์

Be the first to review “เครื่องควบคุมอุณหภูมิพร้อมเซนเซอร์ DC12V Digital LED Temperature Controller 10A Thermostat Control Switch Probe”

 

ลูกค้าสามารถดูนโยบายการรับประกันสินค้าของร้านค้า ได้ตามลิงค์นี้ นโยบายร้านค้า

กรณีสั่งสินค้าส่งทางไปรษณีย์ ทางร้านจะจัดเตรียมส่งสินค้า ภายใน 24 ชั่วโมง หลังจากยืนยันการสั่งซื้อ
จัดส่งทางพัสดุไปรษณีย์ >  เช็คค่าบริการ 
แบบลงทะเบียน 5-7 วัน / EMS 1-2 วัน
 จัดส่งพัสดุเก็บเงินปลายทาง >   เช็คค่าบริการ
ลูกค้าโอนชำระค่าจัดส่งก่อน แล้วรอสินค้า 1-2 วัน ค่าสินค้าชำระที่ ปณ.
 จัดส่งโดยแมสเซนเจอร์  >   เช็คค่าบริการ
เฉพาะกรุงเทพและปริมณฑล สำหรับกรณีเร่งด่วน โทรสั่งของก่อน 12.00 น.
 จัดส่งโดยรถทัวร์  ค่าจัดส่งกรุณาโทรสอบถาม
จัดส่งได้เฉพาะสายเหนือ กับสายอีสานเท่านั้น โดยสินค้าจะถึงเช้าวันถัดไป
 จัดส่งโดยขนส่งเอกชน >  ค่าจัดส่งกรุณาโทรสอบถาม 

หรือมารับสินค้าด้วยตนเอง (หมู่บ้านภูมริน ติดเซียร์รังสิต)

 ดูแผนที่ทางเข้าร้านแบบดาวเทียม
 ดูรูปภาพแผนที่ทางเข้าร้านหลังเซียร์
 ดูรูปภาพแผนที่ทางเข้า ซ.พหลโยธิน 72