เปิดทำการทุกวันจันทร์-เสาร์ หยุดวันอาทิตย์ : 02-992-7091, 02-992-6358
ดูรถเข็น เพิ่ม “เครื่องวัดกรดต่าง เครื่องวัดความเป็นกรดด่าง เครื่องวัดคุณภาพน้ำ pH Meter Digital Waterproof Temperature Tester Replaceable Electrode 14.00 pH Range Water Quality Tester” ในตะกร้าเรียบร้อย
PHM007

เครื่องวัดค่ากรดด่าง เครื่องวัดกรดด่าง มิเตอร์วัดค่ากรดด่าง Waterproof pH meter Tester with Temperature + Auto Cal.

รหัส PHM007
ราคา 1,750 บาท

PHM007

มีสินค้าอยู่ 3

รหัสสินค้า: PHM007 หมวดหมู่:

รายละเอียดสินค้า

เครื่องวัดค่ากรดด่าง เครื่องวัดกรดด่าง มิเตอร์วัดค่ากรดด่าง Waterproof pH meter Tester with Temperature + Auto Cal.

>> เช็คสต๊อคสินค้า <<


PH868-5 ออกแบบสำหรับการวัดค่า PH 0~14พร้อมฟังก์ชั่นการคาลิเบตอัตโนมัติ (pH4, pH7 & pH10), กันน้ำกรเด็น กันฝน จุ่มน้ำได้ทั้งเครื่อง กันฝุ่น ชดเชยอุณหภูมิอัตโนมัติ หน้าจอแสดงผลขนาดใหญ่ อ่านง่าย แสดงผลค่า pH และ อุณหภูมิ °C & °F, data hold, lเตือนเมื่อแบตเตอรี่ต่ำ และปิดเครื่องอัตโนมัติ (สามารถ disable ได้)

PH868-5 มีฟังก์ชั่นการชดเชยอุณภูมิที่เชื่อถือได้ ถึงแม้อุณภูมิการเปลี่ยนแปลงเพียงเล็กน้อย เครื่องจะทำการชดเชยการอ่านค่าได้อย่างแม่นยำ หลักการทำงานจะใช้การปรับหรือลดหรือเพิ่มค่าจากอุณหภูมิ โดยไม่ต้อง  shifting หรือ restarting เครื่องวัด PH. บอดี้เครื่องทำจากวัสดุอย่างดีกันน้ำตามมาตราฐาน IP65 ใช้ได้ทั้งงานในร่มและกลางแจ้ง

  • pH & Temperature สามารถเลือกหน่วยการวัด °C & °F
  • แถมฟรี 3 Buffer solutions (PH4.0, PH7.0 & PH10.0)

 
Features:

  • ใช้งานได้ผลจริง คุ้มค่า ทนทาน ใช้งานง่าย และปลอดภัย
  • กันน้ำมาตราฐาน IP65
  • การคาลิเบตอัตโนมัติสามารถทำได้ดวยการ การกดเพียงปุ่มเดียว
  • Easy 3 points Calibration (pH 4.00, 7.00,10.00)
  • หน้าจอขนาดใหญ่ อ่านค่าง่าย
  • Comes with the Standard Buffer Solutions pH4.0, pH7.0 & pH10.0 USA standards
  • Can measure alkaline solution
  • Display Temperature & pH simultaneously
  • Easy to switch between °C and °F
  • Data Hold & ATC
  • Auto Power off that can be disable
  • Pen size, easy to fit in pocket
  • Low battery indicator
  • Easy to replace and assemble with new battery (LR44)
  • High quality and accurate testing results are guaranteed
  • Approved by strict quality and safety standards
  • Wide range of application: Pools, Aquariums, Labs, Aquaculture, Car washes, Water testing and Waste water treatment

Specifications:

  • IP Grade: IP65 WATERPROOF
  • Measuring Range: 0~14pH
  • Accuracy : ±0.2pH
  • Resolution : 0.1pH
  • Calibration Point: 4, 7, 10
  • Temperature Accuracy: ±1°C
  • Temperature Resolution: 0.5°C/°F
  • Automatic Temperature Compensation : 0~50°C

Operating Condition

  • Operating Temperature: 0°C~50°C (32°F~122°F)
  • Operating Humidity: 0~80%RH
  • Auto Power Off (Sleep Mode) with disable feature
  • Unit °C & °F Switchable
  • Self Calibration
  • Waterproof (IP65)
  • Display: LARGE 4-digit display
  • Low battery indicator
  • Storage Temperature: 0~50°C
  • Dimension: 165 x 35 x 32mm (L x W x H)

Operating Information:

  • Remove the cover from the meter to expose the electrode out. White crystals are normally present on the cap or on the electrode
  • Dip the electrode into the test solution. Press power button and stir it to get a stable reading.
  • The small dot (.) in between the PH reading will flash on and off when measuring starts. The meter will display both pH and temperature (°C or °F).
  • Press hold button to freeze current reading. “Hold” text will be displayed and the small dot stop flashing. Press “HLD” button again to released the hold mode.
  • Press the power button to turn off the meter. Clean the electrode and put back the cover.

PH CALIBRATION

  • PH868-5 has a unique calibration design that features automatic buffer recognition to avoid error(s).
  • Dip the electrode into pH7.0 buffer solution first.
  • Just press calibration (“CAL”) button to start the automatic calibration.
  • Simply press the hold button to adjust the value if buffer solution is not 4, 7, or 10 such as pH3.5, 4.50, etc.
  • When the meter exits the calibration mode, rinse the probe with distilled water or rinse solution like tap water
    Do step 1-3 to calibrate with pH4.0 & pH10.0 and the easy calibration is complete.
  • TEMPERATURE UNIT SETTING (switching °C and °F)
    Turn the meter off first.
    Press the power button & calibration “CAL” button simultaneously.
    Press hold “HLD” button to choose between °C and °F.
    Press calibration “CAL” button to save the temperature unit. An “SA” will be seen on screen.
  • All our products are manufactured under the strict quality control  guidelines established by EN ISO9001-2000 Standard

ชุดสินค้า:

  • ฟรี 1.5V (LR44) แบตเตอรี่ x 4
  • ฟรี 3 x บัฟเฟอร์โซลูชั่นผง: pH4, pH7 และ PH10
  • คู่มือการดำเนินงาน
  • กล่องบรรจุภัณฑ์มาตรฐาน
  • ผลิตภัณฑ์ทั้งหมดของเราเป็นผลิตภัณฑ์ที่ผลิตภายใต้แนวทางการควบคุมคุณภาพอย่างเข้มงวดจัดตั้งขึ้นโดย EN ISO 9001-2000 มาตรฐาน

รับประกันสินค้า 3 เดือน

ข้อมูลเพิ่มเติม

น้ำหนัก 0.300 kg
ขนาด 16.5 x 3.5 x 3.2 in

รีวิว

ยังไม่มีบทวิจารณ์

Be the first to review “เครื่องวัดค่ากรดด่าง เครื่องวัดกรดด่าง มิเตอร์วัดค่ากรดด่าง Waterproof pH meter Tester with Temperature + Auto Cal.”

 

ลูกค้าสามารถดูนโยบายการรับประกันสินค้าของร้านค้า ได้ตามลิงค์นี้ นโยบายร้านค้า

กรณีสั่งสินค้าส่งทางไปรษณีย์ ทางร้านจะจัดเตรียมส่งสินค้า ภายใน 24 ชั่วโมง หลังจากยืนยันการสั่งซื้อ
จัดส่งทางพัสดุไปรษณีย์ >  เช็คค่าบริการ 
แบบลงทะเบียน 5-7 วัน / EMS 1-2 วัน
 จัดส่งพัสดุเก็บเงินปลายทาง >   เช็คค่าบริการ
ลูกค้าโอนชำระค่าจัดส่งก่อน แล้วรอสินค้า 1-2 วัน ค่าสินค้าชำระที่ ปณ.
 จัดส่งโดยแมสเซนเจอร์  >   เช็คค่าบริการ
เฉพาะกรุงเทพและปริมณฑล สำหรับกรณีเร่งด่วน โทรสั่งของก่อน 12.00 น.
 จัดส่งโดยรถทัวร์  ค่าจัดส่งกรุณาโทรสอบถาม
จัดส่งได้เฉพาะสายเหนือ กับสายอีสานเท่านั้น โดยสินค้าจะถึงเช้าวันถัดไป
 จัดส่งโดยขนส่งเอกชน >  ค่าจัดส่งกรุณาโทรสอบถาม 

หรือมารับสินค้าด้วยตนเอง (หมู่บ้านภูมริน ติดเซียร์รังสิต)

 ดูแผนที่ทางเข้าร้านแบบดาวเทียม
 ดูรูปภาพแผนที่ทางเข้าร้านหลังเซียร์
 ดูรูปภาพแผนที่ทางเข้า ซ.พหลโยธิน 72